Ice Melt For Roofs Products
Order Now!
1(888)348-8869
Ice Melt for Roofs with Brody Chemical's Polar Ice Melt
Ice melt for roofs becomes necessary when a lot of water freezes on the top of the house as a result of poor insulation and ventilation. In any household with inadequate insulation, a lot of the heat from the inside of the house, and most commonly from the attic will rise and come out through the roof. In snowy conditions, because snow will gather on the slanted top of any home in the area, this rising heat will liquidize the snow.
This causes it to run down until it meets the eave and the gutter. Here it will freeze, due to the rapid change in heat. The frozen water will then form an ice dam. Any house can face this difficulty in extreme and severely cold conditions, but with poor insulation, it might occur even on the mildest winter night.
Frost dams are a problem, namely because they prevent snow from draining effectively. To stop the blockage, as well as possible interior damage and mould build-up, it is possible to use an ice melt for roofs product, usually available in the form of tablets. These tablets are easy to use and work effectively.
The problem is solved by simply throwing one tablet onto the frost. It will get to work as soon as it makes contact with the ice. Without effort or strenuous activity, the frost dam will soon disappear.
Use a single tablet for every square foot of your problematic roof. First, it will start running down and subsequently spread across the surface of the roof. This starts to happen as soon as it touches the ice. The calcium chloride in the product mixes with the water and the ice turns into liquid. As the ice is gradually dissolved, the water starts to drain from the roof, and when the process is complete, the problem is gone. Ice melt for roofs products are very affordable and easy to use, without the use of a ladder or additional equipment of any kind.
